I bought some stuff from a kid and he gave me some Crower GSR cams i've been told that GSR cams will suit a turbo B16 with this setup better than the stock items, any of you guys have any experience or knowledge on this? also what is a suitably starting point to set up my cam gears for a turbo setup i was thinking something like +2Deg on exhaust and -2Deg on intake to remove some overlap any comments plz?

 

Are the stock GSR cams or are they crower cams? If they are crower cams they will say it in between the lobes and a number will be etched at the dizzy side of the cam. Yes GSR cams in a b16 make a considerable amount of power over the stock b16 cams. this is covered in Jeff Evans site. Gives pretty good power gains throughout specially in the midrange.

 

not to hoard this post . but would type r cams from an integra work better than gsr cams . i have both sets which are better for forced induction on a stock b16a .

 

itr cams will work much better-

 

ITR cams would work wayyy better... i recently picked up 40whp+ from ITR cams alone...

 

outstanding !! i have a set and also have some other goodies .. thanks for the quick reply .

 

Im excited to see how the R cams will preform vs the GSR's I ran last year ...

 

I did 374@14.5psi on stock gsr cams last year... and i just did 421whp@14.5 with the ITR cams... so the gains are worth it!

 

Damn! nice! I did 302 Hp at 12 lbs with super conservative timing. Im gonna see what the Lil B16 will do this year.. with some new goodies

 

thanx for the replys guys!)

 

itr cams

blox type A or B

skunk stage 1 or 2's

if you have a bigger turbo setups with tubular manifolds etcc pro 1's

 

i picked up 30 something hp with 01 itrs compared to my gsr cams. cams are set at 0,0 im sure i could get more out of it with gear tuning as well

 

WHat do u have to make it to 444whp@16psi??? What did u have ???? Veryyyyy interested

 

can you PM me your setup i'm very interested.....interested in the number about ITR cams lmk though