I am running a 37820-p13-n00 computer in an H22 swap into an EG.

A code that came up was for EGR (code 12), which I fixed - I took an EGR control valve off of a '94 Prelude and wired it up everything including the vacuum lines.

I drove the car for 10 miles and there was no check engine. Then, I drove the car again for another 10 miles and the car won't rev past 6500 (still no check engine). I swapped the computer with another (37820-p13-n01). The car still won't rev over 6500.

I don't want to use a GSR computer or a P28 because I am trying to ref the car.

If anyone knows what the problem is or what I should try from here, please let me know. I would really appreciate the help.

 

is the map and tps sensor clips switched are you sure u wired everything correctly

 

if you are running a resistor box check that.i had the same problem and i elimnated it and it fixed the problem.hope this helps.


harv