Posted this in the Tech forum, but did not receive any answers. Hoping you all can help me find out this information.

I am trying to determine the weight difference between a H22 longblock and a B series longblock (B16 and B18c). Did a search and found results comparing the shortblock weight and tranny weight, but cant find anything that compares the longblock weights. If anyone has this info handy, please let me know.

I am basically trying to figure out the approximate weight of my H2B setup vs. a typical B16/B18 swap.

Thanks,

-J

 

dont go there with the weight between the two

50lbs more then a b-series without the trannys

 

I surely dont want to start another war, I simply want an estimation on the weight difference between the longblocks.

-J

 

do a search, someone weighed a bunch of motors, trans, and other stuff out. IIRC the difference in total was only like 40 lbs. its really not that much of a difference.

 

Thanks, as I mentioned above, I did search and couldn't find an answer. Found lots of different engine weights, but not what I am looking for.

 

my guess:
60 lbs heavier than a b18c
75 lbs heavier than a b16

 

These are your approximations for the differences in the longblock weight, not including the transmission?

-J

 

not including transmissions.

 

Great, thanks for the info guys.

-J

 

my car was 2050 with out me in it with a b16 an when i put my h2b in it was 2100

 

Assuming you had about the same amount of weight in the car, this is the best answer I have found so far. Thanks!

-J

 

there is a thread on here about the exact differences...someone weighed them. but the new search sucks *****. i searched for 20 minutes and couldnt find it....but i have read it. motor to motor it was like 15lbs. and with the trans it was like 35 lbs. fully dressed was never weighed but estimated at 50-60lbs. this was over a b16 if i recall correctly. and it was with an h22 trans, which is considerably heavier than a b series trans.....wish i could find that thread....

 

i have lifted both long blocks h23 and b18b..they are close but the h22 is about 30lbs heavier..human error give or take 15lbs

 

I think this is the thread you guys were looking for.

https://honda-tech.com/forums/showth...ght=h22+weight

 

I am wondering why you are interested in the weight differences?

 

I am building up an H2B motor, so I am curious as to what the H22 longblock and B series tranny each weigh. I got my answer...

-J

 

Ook because I seen people use this in H vs B series discussion .....and more then often that it is repeated that the difference in weight isnt as much as people assume

 

I know you can shave "about" 10lbs off the H22 when the balance shafts are removed...