~2.7-2.8 1st gear
Thread Starter
Honda-Tech Member
Joined: Apr 2002
Posts: 1,019
Likes: 0
From: Jax/St. Aug, Fl
~2.7-2.8 1st gear
Besides getting a full custom tranny, how would one get a gear that's longer than all the B-series 1st, but shorter than the 2nd.
Running really high numbers, a longer 1st wouldn't run out so quick.
Would taking the shift out of 60' times decrease it that much.
Just a thought
Or do I not see thick black smoke coming out of my butt.
Running really high numbers, a longer 1st wouldn't run out so quick.
Would taking the shift out of 60' times decrease it that much.
Just a thought
Or do I not see thick black smoke coming out of my butt.
D Tranny Guru
Joined: Oct 2001
Posts: 8,725
Likes: 8
From: Cincity, OH, USA
Re: ~2.7-2.8 1st gear (Pelican)
simple, Spoon...
Alot of the 9.xxx guys use the Spoon gearing in an attempt to hookup in first gear. Let the car roll out then hit second instead of just blowing off first gear gear on the launch.
Alot of the 9.xxx guys use the Spoon gearing in an attempt to hookup in first gear. Let the car roll out then hit second instead of just blowing off first gear gear on the launch.
Thread Starter
Honda-Tech Member
Joined: Apr 2002
Posts: 1,019
Likes: 0
From: Jax/St. Aug, Fl
Re: ~2.7-2.8 1st gear (Pelican)
Looks like about 1800 on http://www.randdmotorsports.com/spoonprice.html nasty. I guess not if your serious. But is that the whole 5+1 gears and final drive or just a final drive set?
Thread
Thread Starter
Forum
Replies
Last Post
iBrandon
Forced Induction
9
Aug 23, 2007 12:17 AM
