New! Version 2.1 released!

I have designed this tool (EasyMap) using Excel. To use this tool, you will need your Crome fuel and ignition tables, Freelog data (CSV files), and Excel.

What the tool does is allow the user (you) to input the datalogged session into the tool to display the AFRs logged during the session in the same table format that your tuning tables are based on.

With the 2.0 version of EasyMap, you don't need a version for Freelog and Crome Pro - you just need one. You can import either a FL CSV file or a CromePro CSV file and they'll both work.

You can also easily change the data 'filters' to only show data you want to look at.
- Say you only want to look at data when your ECT is 170F to 182F, you can do that.
- Or, you only want to look at data when your RPM is 1252 to 1500, you can do that.

You can also change the plotting variable now, so that on the table that's normally used for AFR, you can also plot TPS, IAT, ECT, and all the other variables. This will be VERY helpful for tuners with VERY modified cars that they wish to change the MAP-TPS tables for closed-loop operation.

This will also be very useful for tuners looking to do trending on AFR response to ECT and IAT to accurately tune the ECT/IAT compensation tables.

I'VE ALSO just added the graphing sheet so that tuners that prefer to view things in graphical format can do this easily as well.

You can easily change ANY and ALL of these filters to your liking.
- minimum Hits to display AFR
- max and min Speed
- max and min Gear
- max and min RPM
- max and min ECT
- max and min IAT
- max and min O2 AFR
- max and min MAP
- max and min TPS
- High Cam and Low Cam data
- and rule out data that may be altered by Tip-In

Happy tuning.

EasyMap (Download Link)
- Latest version is 2.1. Please delete older versions.

EasyMap How-To (Download Link)

 

i will try it out i am street tuning my f22 with 880cc and 60-1

 

Please let me know how it goes!

 

i always log my aem with the voltage instead of afr just because for some reason the aem is off from the freelog. is there anyway i can do this with your software

 

There is, but it would be a pretty custom solution, I would recommend going into your log file and changing the voltages in there, then putting it in EasyMap

 

quick bump, just added a graphing utility to view information in a graphical format... see the pic in the first post

 

Good stuff!

I once did something similar to this when tuning with TurboEdit and using the Innovate Lm-1 and LogWorks data

 

pls give me easymap

 

now dead link

 

Dead link, how can i get EasyMap?

 

Does anyone still know where to get EasyMap? The link is dead. Would someone be willing to re-post it?

 

 

I hate smilies, but you deserve this one

 

Cheers