Well my turbo stuff is getting ready to be ordered and shipped, my block is on the way back from golden eagle...Im running 10:1 pistons, crower turbo cams, port and polished head, valvesprings and retainers...a T3/T04E T3 .82 A/R Turbine Housing Stage III Turbine T04E .60 A/R Compressor Housing 60 Trim Compressor Wheel, and the AEM EMS... How much hp do you guys think i could expect at the wheels say around 15psi..I know trboh22 in colorado got 328whp with the t60-1 at 9psi..i know these kind of questions are beaten to death, but its bugging me what i can expect.....

 

I would think roughly the same numbers. That turbo isnt gonna flow enough CFM to put you deep into the 300's.

 

How can you say that a T3/T04E cannot flow enough air to produce 300+ whp? A 60-1 compressor ccan flow 55 lb/min of air, the T04E 60 Trim compressor flows 53 lb/min of air. Not much of a difference! He is running a fairly large turbien housing as well; an .82 A/R with the Stage III turbine. This turbo is easily capable of 450-500 whp.

 

Hmm. Looking over what I posted last night, I dont know why I said that. Guess one too many from the bar. Maybe I misread it, oh well.

 

WHAT???

 

I would like to know more of your setup and your Hp goals and such. I plan on going turbo with 2 years and wanted to know some good setups with ludes..

I have a JDM Type S engine with 11:1 compression now.
Email me if anything..

jdjoseph2000@hotmail.com