I just bought a 99 civic si and the dude said he put in another shifter in it. Well i got my new B&M short shifter and the holes at the bottle are 2 different sizes. The one i took out is way bigger than the new one and i can fit the bearings out of theold one on to this new one!!
Where can i get these parts

http://s93.photobucket.com/alb...parts/

The shifter on the right is the one i took out of the car, thats the one the bearings in the picture came out of

 

Not all shifters have bearings.

Skunk2 and DC usually shop theirs with bearings so that even after you tighten the lower through bolt the action is still smooth, but many shifters aren;t as nice. Stock ones don't have those bearings either, and I don't think the B&M is designed to carry them either.

Here's an exploded diagram of a genuine honda shifter - note the same lack of bearings:



Numbers 4 and 5 are not bearings, but just spacers/sliding bushings.

Did your B&M not at least come with similiar bushings?

 

http://cgi.ebay.com/ebaymotors...witem=

This is what i got, i remember the last one i got for my integra it had bearings that fit in there