cylinder 2 and 4 misfire
Honda-Tech Member
iTrader: (3)
Joined: Jan 2002
Posts: 2,456
Likes: 0
From: Albuquerque, United States of America
Re: cylinder 2 and 4 misfire (drock305)
what year and model of car is it? What kind of mods do you have? When was the last time you replaced the spark plugs, wires, and perhaps the distributor cap and rotor?
Honda-Tech Member
Joined: Aug 2007
Posts: 9,865
Likes: 5
From: Oregon
Re: cylinder 2 and 4 misfire (stocker2shocker91)
pull the cap, make sure the rotor didn't fall off.
check the wires at night, make sure you don't have cross arcing
worst case, burned valves and blown head gaskets cause this condition as well
check the wires at night, make sure you don't have cross arcing
worst case, burned valves and blown head gaskets cause this condition as well
I requested a short story for a title.
Joined: Jul 2005
Posts: 1,707
Likes: 0
From: hard parked at the sandbar
Re: cylinder 2 and 4 misfire (idrivesideways)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by idrivesideways »</TD></TR><TR><TD CLASS="quote">pull the cap, make sure the rotor didn't fall off.
check the wires at night, make sure you don't have cross arcing
worst case, burned valves and blown head gaskets cause this condition as well </TD></TR></TABLE>
also the leakin voltage will cause white marks on the wires
check the wires at night, make sure you don't have cross arcing
worst case, burned valves and blown head gaskets cause this condition as well </TD></TR></TABLE>
also the leakin voltage will cause white marks on the wires
Thread
Thread Starter
Forum
Replies
Last Post
