im looking to buy a turbo used or new with no shaft play. i prefer a external wastegate. looking for a t3/t4 size. im planning on turbocharging a k24 engine. let me know what you have.

 

full t3 set-up only 1k miles on it turbonetics .48 a/r externally gated

 

I have a t3/67 that tom made for me about 2 years ago.. Made 454 on pump at 16 psi. Might be the right size for your setup. .63 a/r would spool up quick your you with that size motor.. I paid 725 for it.. would let it go for 500 firm.. has about 6 dyno hours on it and that's it.. ran it 3 times at the track and broke 2 axles then blew off pipes. I wouldn' t go lower than a .70 a/r and .63 exhaust..

 

thanks but for a used turbo its a little too much for me.

 

i'll let mine go for 350 hell i'll even meet you

 

im looking for something bigger then just a T3 turbo.

 

What block are you using? k24a4 or k24a2?

 

im going with a lower compression k24. not the TSX a2.

 

http://www.hondamarketplace.co...07200

 

I have a precision 50trim I'd selll for $450. used for 4000 miles. made 427awhp on my evo.

 

Then you aren't gonna need a bigger turbo. Alotta na dsm guys who boost their set-ups use t/3s due to their low compression and low revs

 

i have a t3/t4 brand new in the box not even open. i have a receipt for it so its legit.. ill let it go for 700$ its a turbonetics polish one.

 

my old EG i was running a drag kit with a T3/T4 turbo and loved it since then and that was on a sohc vtec. perfect spool time and no lag. besides if i want more power i wouldnt be maxing out the turbo not unless i got crazy.

 

bump for a fellow wausau member

 

who is this from knight rider?