I remember there was a thread here on how to make your own 4-1 collector but i cant seem to find it. If anyone has personal experience on making a jig to hold the tube right please chime in

 

bump

 

search "mk1fan4life" on the vortex and you'll see a thread I made called "building a turbo manifold." Its not complete, but you see how to build a collector, and a simple Jig i posted for use in a chop saw for those on a budjet

TigWiz = Mk1Fan4Life

 

I had a big deal about it, but people bitched at me, so I took it off. Not really very hard though...just simply build a unit that turns your pipe 90 degrees after cutting accurately. I used a square plate that had an attached expandable bushing. It essentially connected a square plate to the end of the pipe and locked into my jig. I'd cut, turn the pipe on the end plate 90 degrees, then cut again....worked every time.

 

sweet any pix of the jig??

 

Searching will yield the answer to this question.