does 94-97 integra ball joints fit 98-01? upper ball joints
also how can i tell when i need new ball joints?


Modified by thanh4o8 at 7:45 PM 8/21/2008

 

i am pretty sure that they are the same for all 94-01 tegs, don't quote me tho, a part store could tell you for sure tho. the only ones i have found available are adjustable. otherwise you can get the whole upper control arm with ball joint..... its much easier that way.

to check it, lift the front end off the ground, grab the wheel at 12 and 6 (top and bottom) and push in and out, if it moves and you can see it moving, then it needs to be replaced

 

when i turn left and hit this one sweet spot there is poping noises. would that be also the problem?

 

i guess its possible, it would have to be really worn out if you can hear it tho... that noise could be caused by worn out stuts too.

 

Make sure u lift it by the frame . not by the LCA.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t-splice.mn &raquo;</TD></TR><TR><TD CLASS="quote">

to check it, lift the front end off the ground, grab the wheel at 12 and 6 (top and bottom) and push in and out, if it moves and you can see it moving, then it needs to be replaced</TD></TR></TABLE>

If it has a lot alot of play Replace them quick because U don't want the ball joint popping out of the steering knuckle.. if the ball joint pops all i can say it a OUCCCCCHHH

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chicago_Type_R &raquo;</TD></TR><TR><TD CLASS="quote">Make sure u lift it by the frame . not by the LCA.



If it has a lot alot of play Replace them quick because U don't want the ball joint popping out of the steering knuckle.. if the ball joint pops all i can say it a OUCCCCCHHH</TD></TR></TABLE>

i will check them for sure tommorow