S2000 emblem placement measurements needed (front fenders)
Thread Starter
Honda-Tech Member
Joined: Jul 2001
Posts: 6,030
Likes: 0
From: Northeast, USA
S2000 emblem placement measurements needed (front fenders)
Anyone have these measurements? And no, I won't leave them off because it looks better.
Thanks in advance!
- Louis
Thanks in advance!
- Louis
Re: S2000 emblem placement measurements needed (HybridKOOP)
if i get a chance tonight ill ask my neighbor if i can take a measurement... i thought it was right next to the sidemarker, about 1-1.5" away?
* B A N N E D *
Joined: Aug 2006
Posts: 4,557
Likes: 1
From: states united
Re: (Curiouz_G)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Curiouz_G »</TD></TR><TR><TD CLASS="quote">heres an idea. YOU measure it </TD></TR></TABLE>
who are you referring to?
if it's the OP, his are currently off, thus the need for his question
if it's chris, his are off as well, thus the point of him asking his neighbor, who currently has his on
reading. it works.
who are you referring to?
if it's the OP, his are currently off, thus the need for his question
if it's chris, his are off as well, thus the point of him asking his neighbor, who currently has his on
reading. it works.
* B A N N E D *
Joined: Aug 2006
Posts: 4,557
Likes: 1
From: states united
Re: (Black S2K)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black S2K »</TD></TR><TR><TD CLASS="quote">graf is my hero</TD></TR></TABLE>
i just don't know why that was so difficult to figure out?
o well, hopefully it's clarified now
i just don't know why that was so difficult to figure out?
o well, hopefully it's clarified now
Trending Topics
Honda-Tech Member
Joined: Mar 2002
Posts: 5,449
Likes: 0
From: Yeah IM from Jersey, big wup, wanna fight about, it, USA
Re: (96-EJ6 B18C)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96-EJ6 B18C »</TD></TR><TR><TD CLASS="quote">1.75 fingers back form the trailing edge of the side marker, and centered vertically on the side marker. Black 08 CR "S 2000" emblems FTW! 
</TD></TR></TABLE>
what the hell kind of measurement is a finer length... what happens if i have longer fingers than you...
hey koop, i think i know a site that has a template for the emblems... ill look it up in a minute...
</TD></TR></TABLE>what the hell kind of measurement is a finer length... what happens if i have longer fingers than you...
hey koop, i think i know a site that has a template for the emblems... ill look it up in a minute...
i ♥ my honda
Global Mod
Global Mod
Joined: May 2003
Posts: 9,943
Likes: 7
From: Maryland
Re: S2000 emblem placement measurements needed (HybridKOOP)
C'mon now.. Just eyeball it... (Not my car)
I personally think It would look better more toward the right/center then the stock location...
I personally think It would look better more toward the right/center then the stock location...
Honda-Tech Member
Joined: Mar 2002
Posts: 5,449
Likes: 0
From: Yeah IM from Jersey, big wup, wanna fight about, it, USA
Re: S2000 emblem placement measurements needed (HybridKOOP)
ehhhhh i thought it had a template but i guess not... im pretty sure this was the site that i was thinking:
http://www.hondapartsdeals.com...t.pdf
prolly wont help you in the least, but may help other people...
http://www.hondapartsdeals.com...t.pdf
prolly wont help you in the least, but may help other people...
Member
Joined: Jan 2003
Posts: 1,786
Likes: 1
From: Tri Cities, WA
Re: S2000 emblem placement measurements needed (White Smoke)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by White Smoke »</TD></TR><TR><TD CLASS="quote">C'mon now.. Just eyeball it...
</TD></TR></TABLE>
That's all I did, just look at a pic and put them there.
</TD></TR></TABLE>
That's all I did, just look at a pic and put them there.
Honda-Tech Member
Joined: Mar 2002
Posts: 5,449
Likes: 0
From: Yeah IM from Jersey, big wup, wanna fight about, it, USA
Re: S2000 emblem placement measurements needed (96-EJ6 B18C)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96-EJ6 B18C »</TD></TR><TR><TD CLASS="quote">
That's all I did, just look at a pic and put them there. </TD></TR></TABLE>
hey lou... im sure if off 1/8" no one will ever notice...just use a level and a ruler so both sides are straight and the same distance away from the side marker
That's all I did, just look at a pic and put them there.
</TD></TR></TABLE>hey lou... im sure if off 1/8" no one will ever notice...just use a level and a ruler so both sides are straight and the same distance away from the side marker
Thread
Thread Starter
Forum
Replies
Last Post
