camshafts picking
Mr. Badwrench
Joined: May 2002
Posts: 14,146
Likes: 2
From: stranger in a strange land
Re: camshafts picking (tegra2G)
more specifically, we need to know what your whole setup is and where you want to make your power.
520 with gsr cams 84mm b16
710 with IPG cams 83mm gsr.
520 with gsr cams 84mm b16
710 with IPG cams 83mm gsr.
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 178
Likes: 0
From: Port Hope, ON, Canada
Re: camshafts picking (boostedcivicsir)
sorry lol
I have a b18c1 wiseco 9.0 pistons stock bore, port and polished head, SP quick 4 exhaust manifold, blox intake manifold, 440 RC injectors, sce head gasket, arp studs, presicion T3 turbo 50 trim 54mm compressor wheel, with a 57mm turbine wheel, and a .48 T3 turbine housing,
I not gunna be revving this motor to high, maybe 7K or a little higher
I have a b18c1 wiseco 9.0 pistons stock bore, port and polished head, SP quick 4 exhaust manifold, blox intake manifold, 440 RC injectors, sce head gasket, arp studs, presicion T3 turbo 50 trim 54mm compressor wheel, with a 57mm turbine wheel, and a .48 T3 turbine housing,
I not gunna be revving this motor to high, maybe 7K or a little higher
Thread
Thread Starter
Forum
Replies
Last Post