i have a eg with a k20 swap, everything is on and ready to go, but it wont start, k pro gets warm but is not on............any advise will be highly appriciated

 

have fuel pressure?

 

no the fuel pump does not go on either

 

checked the grounds, rechecked engine harness twice

 

check make sure the immobilizer is turn off, have good ground wires

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98EK20 &raquo;</TD></TR><TR><TD CLASS="quote">checked the grounds, rechecked engine harness twice</TD></TR></TABLE>


yeah i seen that do it..

 

where is the immobilizer located

 

the immobilizer is in the k pro laptop window "parameters window" section misc.

 

what type of conversion harness are you using.

 

05-06 k20 converted to eg

 

yeah but you have to have a harness to use the type s engines and ecu in an eg. who did it, a friend of yours or, hybrid, rcrew, hasport etc etc...

 

holeshot racing a shop out her and its the second time i take it to him and the same thing happens

 

your car has any CEL?, does it has spark,fuel,good charge car battery,immobilizer disable,ecu is good, and from my experience if the map or tps sensor is fry the engine will not start, had this problem on my car.

 

do you have a laptop hooked up to the ecu?

 

it has cel, fuel, good battery, i dont no if the immobilizer is turned off..................i dont have the program for k-pro