I have a 99 civic dx and is adding a 92 jdm b16a, I'm currently working on the wiring and I have to add the vtec and stuff but where can I find pins to add into the wire harness. Is there anywhere I can find a kit to pull and put wires into the wire harness. thanks

 

i just used an old harness from the junkyard and took the pins from it. as for getting the pins out, its kind of tricky. there is a little plastic tab that you have to push and then the pin will pull out. you have to work with it a little bit, just use a small screw driver.


[Modified by rookie2nr, 5:51 PM 7/13/2002]