alrighty i've only posted here a couple time and it was about my h22a4 sh to h22a swap. everyone who helped me out thanks alot. everything is going smooth but the transmission. I've looked a pretty good bit about putting the sh transmission on a non sh block but couldnt really find anything. i really need help with this guys. If someone has done this and knows what i have to do to keep my sh tranny and make it work please help. I have no clue what axles to buy or anything. Thanks in advance.

 

you have to get an adapter plate. There are a couple of guys on here that make them, or have a machine shop custom make one for you.

 

thanks man. To keep atts? i was wanting to get rid of atts.

 

please anyone with any idea. would a 92 si half shaft work in its place since its 36 spline

 

The SH transmission is NOT usable without the ATTS system.

 

To add to Matt's post, not only is the SH tranny not useable without the ATTS unit, but the ATTS unit cannot bolt to the non-SH block, even with an adaptor plate, it sits to close to the block to allow a plate to fit in there, and the oil filter and such are in the way as well.

 

wow . . . thanks alot guys. so do i need a h22 tranny or would a h23 work?

 

h23, h22, f23, etc

any h or f series transmission, just not an ATTS one and not an s2000 one.

 

Alright thanks alot mgags7 you have helped me out alot! So i have a couple more questions, would it matter about the spline cuz I kno that mine is a 36. and clutch could i keep my exedy clutch and my fidanza flywheel? thanks man.

 

your clutch and flywheel will be fine.

You'll definitely need an intermediate shaft from a normal non-ATTS car, I'm not 100% sure about the pass. side axle though.

 

yea i knew about the intermediate shaft. where would be a good place to pick one up and what year do i look for? 97-01? my buddy said i would prob have to go to the stealership

 

pm me, I have an intermediate shaft for you.