EGT , best location?
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 4,915
Likes: 1
From: jimmysville VT,, NY, USA
EGT , best location?
Question: What is the best location in the exhaust manifold to put a egt thermocouple in?
I have read that it should be in the #3 cylinder because it gets the hottest, how far from the exhaust flange should the bung be welded on?
This is going to be on a b series with a supercharged setup if that makes any difference.
thanks
I have read that it should be in the #3 cylinder because it gets the hottest, how far from the exhaust flange should the bung be welded on?
This is going to be on a b series with a supercharged setup if that makes any difference.
thanks
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 4,915
Likes: 1
From: jimmysville VT,, NY, USA
Re: EGT , best location? (locash)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by locash »</TD></TR><TR><TD CLASS="quote">I'd suggest mounting it half the diameter of the exhaust port from the head flange. (ie: an inch or so).
</TD></TR></TABLE>
thank you
</TD></TR></TABLE>
thank you
Honda-Tech Member
Joined: Dec 2004
Posts: 2,429
Likes: 2
From: B.C. Canada
Re: (HamiltonRex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HamiltonRex »</TD></TR><TR><TD CLASS="quote">anyone ever put these in the downpipe?</TD></TR></TABLE>
not effective enough in the dp. it needs to be at the hottest point to be of any use.
not effective enough in the dp. it needs to be at the hottest point to be of any use.
Thread
Thread Starter
Forum
Replies
Last Post
Vtec92Civic
Honda Civic / Del Sol (1992 - 2000)
3
Oct 20, 2004 02:07 PM
