hey guys I'm thinking of purchasing a new arm rest for the R. The one I have is really worn down. I was wondering how i would go about putting my old number on the new arm rest. I'm not sure if i will need to put holes into the new arm rest. if anyone has done this already please help me out.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Renegade &raquo;</TD></TR><TR><TD CLASS="quote">1. Remove the lid/armrest from the rest of the center console
2. unscrew the four screws ( unless there are less I can't remember) and separate the cloth part from the plastic piece
3. Remove the one way retainers by squeezing it together it will fold in half, the retainers I mean.
walla that is how I have done it. It's been a while so there may be more steps in between but that is the basics </TD></TR></TABLE>

 

Refer to this thread for more info:

https://honda-tech.com/zerothread?id=193436

 

does len sell new armrests? Mine is pretty faded

 

i understand how to take it off. i hope i don't break the retainers, but i was wondering if the new arm rest will have holes for the old number badge. thanks for the info doostur!

 

i took mine off...just incase. if you find the answer i would also like to know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jgirard &raquo;</TD></TR><TR><TD CLASS="quote">does len sell new armrests? Mine is pretty faded</TD></TR></TABLE>

Yes I do.

 

thank you sir, I'll be in contact with you, couple other things I need as well

 

Len, please you answere the poor girl's question.
"<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by typer_girl &raquo;</TD></TR><TR><TD CLASS="quote">i understand how to take it off. i hope i don't break the retainers, but i was wondering if the new arm rest will have holes for the old number badge. thanks for the info doostur! </TD></TR></TABLE>"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by typer_girl &raquo;</TD></TR><TR><TD CLASS="quote">i understand how to take it off. i hope i don't break the retainers, but i was wondering if the new arm rest will have holes for the old number badge. thanks for the info doostur! </TD></TR></TABLE>Len sells them. I purchased one awhile back from him along with a blank badge. I removed my badge from the worn armrest and placed the new (blank) badge on that armrest. The badge will come with a set of retainers and armrest comes with the holes already in it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smalltownVA &raquo;</TD></TR><TR><TD CLASS="quote">Len sells them. I purchased one awhile back from him along with a blank badge. I removed my badge from the worn armrest and placed the new (blank) badge on that armrest. The badge will come with a set of retainers and armrest comes with the holes already in it.</TD></TR></TABLE>

BEAT ME TO IT. YUP, IT'S GO HOLES ALREADY THERE. GOOD LUCK

 

ok len i'll have my husband order me one from you today.