is this a good deal(exhaust)?
Thread Starter
Joined: Jul 2007
Posts: 60
Likes: 0
From: South Gate, California, Los Angeles
is this a good deal(exhaust)?
http://cgi.ebay.com/ebaymotors...ZWDVW
i was looking for an apexi n1 and found out that is runs for about $250, and that just the muff.
this exhaust seem to be good, and it comes with 2.5 piping and it is all stainless steel
and i read the comments left, and people like it.
here is video of how it sounds
so what do you guys think?
i was looking for an apexi n1 and found out that is runs for about $250, and that just the muff.
this exhaust seem to be good, and it comes with 2.5 piping and it is all stainless steel
and i read the comments left, and people like it.
here is video of how it sounds
so what do you guys think?
Junior Member
Joined: Dec 2005
Posts: 774
Likes: 0
From: somewere, tx, usa
Re: is this a good deal(exhaust)? (EJcharlie)
Ebay = crap. if you can't get the good stuff, save up. Don't be a tool and drive with an exhaust that will fall apart and sound even more like *** then it did new.
Member
Joined: Aug 2007
Posts: 1,716
Likes: 0
From: South Jersey
Re: is this a good deal(exhaust)? (moores55)
you can get it cheaper on ebay than that
if i were you and had the money i would just buy the apexi axleback or muffler and get some piping done at an exhaust shop.
if i were you and had the money i would just buy the apexi axleback or muffler and get some piping done at an exhaust shop.
Trending Topics
Member
Joined: Aug 2007
Posts: 1,716
Likes: 0
From: South Jersey
Re: is this a good deal(exhaust)? (EJcharlie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJcharlie »</TD></TR><TR><TD CLASS="quote">what would be some differences between this and a Apexi N1?</TD></TR></TABLE>
basically a name.
ebay stuff is cheap but it depends on what you get (person to person really)
the exhaust i got had the S pipe drag on the ground whichever way you installed it, but others it fit fine
basically a name.
ebay stuff is cheap but it depends on what you get (person to person really)
the exhaust i got had the S pipe drag on the ground whichever way you installed it, but others it fit fine
Joined: Feb 2008
Posts: 10
Likes: 0
From: dodge city, ks, usa
Re: is this a good deal(exhaust)? (EJcharlie)
they're probably made of different material..thats about it..dont listen to ppl on here telling u to get the best stuff..ive bought **** frm ebay n it performs and looks hella nice too. they prolli jus hate becuz its not 'name brand' but yea man giv it a shot and try out that exhaust..peace
Thread Starter
Joined: Jul 2007
Posts: 60
Likes: 0
From: South Gate, California, Los Angeles
Re: is this a good deal(exhaust)? (slacks)
one reason i thought it was a good deal was because it is stainless steel.
and it comes with piping.
i saw many other exhaust system on ebay for much less and they did not seem to be as good as this one.
if you hear the video, a guy just got it, i dont hear much difference between the Apexi n1 and this one.
and it comes with piping.
i saw many other exhaust system on ebay for much less and they did not seem to be as good as this one.
if you hear the video, a guy just got it, i dont hear much difference between the Apexi n1 and this one.
Member
Joined: Mar 2007
Posts: 1,323
Likes: 0
From: spartanburg, sc
Re: is this a good deal(exhaust)? (EJcharlie)
sounds like *** in the video...doesn't sound as smooth as an N1. but thats jsut sound. honestly i had a full apexi cat back and a knock off muffler with exhaust mandrel piping and they both felt the same. i say try it out n take a risk.
Re: (boost and bass)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boost and bass »</TD></TR><TR><TD CLASS="quote">obviously material used is somewhat important but doesnt a 2.5 apex-i pipe flow just the same as a another 2.5 pipe of a "fake" exaust</TD></TR></TABLE>
Not when it's dragging on the ground and it's rusted to ****, the welds falling apart.. Maybe I'm exaggerating a bit, but you get the point.
Not when it's dragging on the ground and it's rusted to ****, the welds falling apart.. Maybe I'm exaggerating a bit, but you get the point.
Honda-Tech Member
iTrader: (2)
Joined: May 2005
Posts: 2,934
Likes: 1
From: Daly City/ San Mateo, CA, US
Re: (99GreenEX)
I have an n1 replica (tsudo to be exact), eh i mean ****.. I wasnt looking to pay more than $300 for an exhaust and basicly..........I like it.. I can keep it relatively quiet with a silencer and the welds and quality are better than i expected... 
as for that one specifically, i dunno, never heard of it...
as for that one specifically, i dunno, never heard of it...
B*a*n*n*e*d
Joined: Sep 2004
Posts: 4,056
Likes: 0
you can get the exact same thing in the sponsor section. i think it was 170 shipped.
i bought one and i also run a test pipe resonator...sounds deep way better then teh video provided...then again i was running 2 resonators instead of one...but ya 170 sponsor section.
i bought one and i also run a test pipe resonator...sounds deep way better then teh video provided...then again i was running 2 resonators instead of one...but ya 170 sponsor section.
Thread Starter
Joined: Jul 2007
Posts: 60
Likes: 0
From: South Gate, California, Los Angeles
Re: (The Lobster)
well i bought it and took the risk, well, its ok, i still have the cat on, i got for $200 shipped. the exhaust seems to be a good quality, i put it on this weekend. everything went on easily. sounds good. not like a N1 but i got what i paid for.
Honda-Tech Member
Joined: Nov 2007
Posts: 154
Likes: 0
From: YOUR MAMAS HOUSE, TX, USA
Re: (EJcharlie)
lol i don't know if anyone else has had this prob. but all 3 of my apexi N1 both n/a and one turbo. fell apart right there at the last weld on the canon before the tip. so F*** the N1 lol I got me a Bee*R lol
Honda-Tech Member
Joined: Dec 2005
Posts: 1,064
Likes: 0
From: west chester, pa
Re: (jwerks)
i have a modded tsudo and it holds up fine got it for 60 used,
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jwerks »</TD></TR><TR><TD CLASS="quote">lol i don't know if anyone else has had this prob. but all 3 of my apexi N1 both n/a and one turbo. fell apart right there at the last weld on the canon before the tip. so F*** the N1 lol I got me a Bee*R lol</TD></TR></TABLE>
nice R32 BTW
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jwerks »</TD></TR><TR><TD CLASS="quote">lol i don't know if anyone else has had this prob. but all 3 of my apexi N1 both n/a and one turbo. fell apart right there at the last weld on the canon before the tip. so F*** the N1 lol I got me a Bee*R lol</TD></TR></TABLE>
nice R32 BTW