is this a good deal(exhaust)?
02-26-2008, 04:11 PM
#1
Thread Starter
Join Date: Jul 2007
Location: South Gate, California, Los Angeles
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
is this a good deal(exhaust)?
http://cgi.ebay.com/ebaymotors...ZWDVW
i was looking for an apexi n1 and found out that is runs for about $250, and that just the muff.
this exhaust seem to be good, and it comes with 2.5 piping and it is all stainless steel
and i read the comments left, and people like it.
here is video of how it sounds
so what do you guys think?
i was looking for an apexi n1 and found out that is runs for about $250, and that just the muff.
this exhaust seem to be good, and it comes with 2.5 piping and it is all stainless steel
and i read the comments left, and people like it.
here is video of how it sounds
so what do you guys think?
02-26-2008, 04:36 PM
#3
Junior Member
Join Date: Dec 2005
Location: somewere, tx, usa
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Re: is this a good deal(exhaust)? (EJcharlie)
Ebay = crap. if you can't get the good stuff, save up. Don't be a tool and drive with an exhaust that will fall apart and sound even more like *** then it did new.
02-26-2008, 05:12 PM
#6
Member
Join Date: Aug 2007
Location: South Jersey
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
Re: is this a good deal(exhaust)? (moores55)
you can get it cheaper on ebay than that
if i were you and had the money i would just buy the apexi axleback or muffler and get some piping done at an exhaust shop.
if i were you and had the money i would just buy the apexi axleback or muffler and get some piping done at an exhaust shop.
Trending Topics
02-26-2008, 05:13 PM
#8
Member
Join Date: Aug 2007
Location: South Jersey
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
Re: is this a good deal(exhaust)? (EJcharlie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJcharlie »</TD></TR><TR><TD CLASS="quote">what would be some differences between this and a Apexi N1?</TD></TR></TABLE>
basically a name.
ebay stuff is cheap but it depends on what you get (person to person really)
the exhaust i got had the S pipe drag on the ground whichever way you installed it, but others it fit fine
basically a name.
ebay stuff is cheap but it depends on what you get (person to person really)
the exhaust i got had the S pipe drag on the ground whichever way you installed it, but others it fit fine
02-26-2008, 05:18 PM
#9
Join Date: Feb 2008
Location: dodge city, ks, usa
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Re: is this a good deal(exhaust)? (EJcharlie)
they're probably made of different material..thats about it..dont listen to ppl on here telling u to get the best stuff..ive bought **** frm ebay n it performs and looks hella nice too. they prolli jus hate becuz its not 'name brand' but yea man giv it a shot and try out that exhaust..peace
02-26-2008, 05:20 PM
#10
Thread Starter
Join Date: Jul 2007
Location: South Gate, California, Los Angeles
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: is this a good deal(exhaust)? (slacks)
one reason i thought it was a good deal was because it is stainless steel.
and it comes with piping.
i saw many other exhaust system on ebay for much less and they did not seem to be as good as this one.
if you hear the video, a guy just got it, i dont hear much difference between the Apexi n1 and this one.
and it comes with piping.
i saw many other exhaust system on ebay for much less and they did not seem to be as good as this one.
if you hear the video, a guy just got it, i dont hear much difference between the Apexi n1 and this one.
02-27-2008, 08:14 PM
#16
Member
Join Date: Mar 2007
Location: spartanburg, sc
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Re: is this a good deal(exhaust)? (EJcharlie)
sounds like *** in the video...doesn't sound as smooth as an N1. but thats jsut sound. honestly i had a full apexi cat back and a knock off muffler with exhaust mandrel piping and they both felt the same. i say try it out n take a risk.
02-27-2008, 08:18 PM
#17
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2007
Location: Snohomish County, WA
Posts: 3,683
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boost and bass)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boost and bass »</TD></TR><TR><TD CLASS="quote">obviously material used is somewhat important but doesnt a 2.5 apex-i pipe flow just the same as a another 2.5 pipe of a "fake" exaust</TD></TR></TABLE>
Not when it's dragging on the ground and it's rusted to ****, the welds falling apart.. Maybe I'm exaggerating a bit, but you get the point.
Not when it's dragging on the ground and it's rusted to ****, the welds falling apart.. Maybe I'm exaggerating a bit, but you get the point.
02-27-2008, 09:50 PM
#19
Honda-Tech Member
iTrader: (2)
Join Date: May 2005
Location: Daly City/ San Mateo, CA, US
Posts: 2,934
Likes: 0
Received 1 Like
on
1 Post
Re: (99GreenEX)
I have an n1 replica (tsudo to be exact), eh i mean ****.. I wasnt looking to pay more than $300 for an exhaust and basicly..........I like it.. I can keep it relatively quiet with a silencer and the welds and quality are better than i expected... 
as for that one specifically, i dunno, never heard of it...
as for that one specifically, i dunno, never heard of it...
02-27-2008, 11:27 PM
#21
Honda-Tech Member
Join Date: Sep 2004
Location: Morgantown, WV, bewbies
Posts: 4,056
Likes: 0
Received 0 Likes
on
0 Posts
you can get the exact same thing in the sponsor section. i think it was 170 shipped.
i bought one and i also run a test pipe resonator...sounds deep way better then teh video provided...then again i was running 2 resonators instead of one...but ya 170 sponsor section.
i bought one and i also run a test pipe resonator...sounds deep way better then teh video provided...then again i was running 2 resonators instead of one...but ya 170 sponsor section.
03-04-2008, 04:09 PM
#22
Thread Starter
Join Date: Jul 2007
Location: South Gate, California, Los Angeles
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: (The Lobster)
well i bought it and took the risk, well, its ok, i still have the cat on, i got for $200 shipped. the exhaust seems to be a good quality, i put it on this weekend. everything went on easily. sounds good. not like a N1 but i got what i paid for.
03-04-2008, 04:20 PM
#23
76.26.106.124
didnt you know???
the apexi logo on apexi n1's add like 40hp and because the logo is indented in the muffler it makes your exhaust note 1000000000 times more badass!
the apexi logo on apexi n1's add like 40hp and because the logo is indented in the muffler it makes your exhaust note 1000000000 times more badass!
03-04-2008, 04:20 PM
#24
Honda-Tech Member
Join Date: Nov 2007
Location: YOUR MAMAS HOUSE, TX, USA
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EJcharlie)
lol i don't know if anyone else has had this prob. but all 3 of my apexi N1 both n/a and one turbo. fell apart right there at the last weld on the canon before the tip. so F*** the N1 lol I got me a Bee*R lol
03-04-2008, 07:52 PM
#25
Honda-Tech Member
Join Date: Dec 2005
Location: west chester, pa
Posts: 1,064
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jwerks)
i have a modded tsudo and it holds up fine got it for 60 used,
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jwerks »</TD></TR><TR><TD CLASS="quote">lol i don't know if anyone else has had this prob. but all 3 of my apexi N1 both n/a and one turbo. fell apart right there at the last weld on the canon before the tip. so F*** the N1 lol I got me a Bee*R lol</TD></TR></TABLE>
nice R32 BTW
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jwerks »</TD></TR><TR><TD CLASS="quote">lol i don't know if anyone else has had this prob. but all 3 of my apexi N1 both n/a and one turbo. fell apart right there at the last weld on the canon before the tip. so F*** the N1 lol I got me a Bee*R lol</TD></TR></TABLE>
nice R32 BTW