Notices

Professionally built Turbo D16 Motor/Turbo Setup

Thread Tools
 
Search this Thread
 
Old Feb 26, 2008 | 09:36 AM
  #1  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default FS:UPDATED!!!!!!! Professionally built Turbo D16 Motor/Turbo Setup

Im just testing waters as i am in NO rush whatsoever to sell this unless i get the right price for it, Reason i am selling is because of car theft and because i need a downpayment on a new car, so here goes:







The Bottom End:

All work was done By NRG-Tech of long-island, including hot-tank/clean,inspected and machine work.
Bottom End includes
NEW OEM crank
Custom turbo clearances
custom clevite race bearings
Weisco Forged pistons (nitrate coated skirts)
Eagle H-Beam connecting rods w/Arp hardware
enlarged journals
Fully Blue printed and balanced.
Comes with oil pan, pick up, and other OEM bottom end peices.

Head:
Head came off of Rabbit's old single cam setup which was then dissassembled cleaned/inspected/assembled and machined at NRG tech:










Head includes:
Crower titanium springs and retainers,
Crower Turbo Race cam,
AEM adjustable cam gear(BLUE),
Skunk2 stainless steel nitrate coated valves
New valve seals
Edlebrock Performer-X intake Manifold( brand new as well still in box)
Red HONDA valve cover

Head IS still in shrinkwrap from when i got it back from NRG as well as the bottom end.

This setup is easily capable of making over 400hp to the wheels reliably, no corners were cut nothing was put together half assed.

MOTOR AND HEAD HAVE 0 MILES.

3k FIRM for long block!!!!


Up for sale as well:
Basically complete Turbo Setup
Turbo: Garret 57 trim w/ .63 a/r upgraded stage 3 wheel ( turbo has 100 miles in total)
HUGE FMIC 3inch inlet/outlet end tanks, IC is 3" thick
IC piping along with all silicon couplers and T-bolt clamps ( not those shity worm clamps)
Greddy RS Bov purple top
Ramhorn Turbo manifold
3" dp w/flex pipe and 2 bungs for o2 sensor as well as egt/wideband etc.
Turbo feed line with fitting
Actechic boost gauge ( still new in box)

Other random parts:

Rs-R exmag Axle back exhaust
Vibrant 3" inlet outlet muffler
P28 ecu

I AM NOT WILLING TO PART THE TURBO KIT NOR AM I WILLING TO PART OUT THE MOTOR. If you want to buy the turbo kit seperatly from the motor that is fine.
Please PLEASE dont lowball me as most of these parts are either BRAND NEW or have close to almost NO miles, jsut to give you an idea i payed close to 4000 to have the motor built



Modified by FHTB20allday at 3:10 PM 3/3/2008
Old Feb 26, 2008 | 10:29 AM
  #2  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

BUMPP bump bump it up
Old Feb 26, 2008 | 10:47 AM
  #3  
one bad dx's Avatar
Member
 
Joined: Sep 2005
Posts: 3,779
Likes: 1
From: Neer Canada Dood, ny, 12929
Default Re: (FHTB20allday)

Nice user name.......support a site full of thieves and wanna be pocket change gangsta's. Nice setup but B20 sucks my taint.......hard.
Old Feb 26, 2008 | 01:12 PM
  #4  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

lolol i hear you on that one. i try to advocate as much honda-techness as i can on there, that site is also one of the reasons why i will not be owning a honda anymore(i.e to much theft) this is the second time something has happened to honda that i owned and it most likely has something to prob do with that site, unfortunatly.
Old Feb 26, 2008 | 01:16 PM
  #5  
daluv's Avatar
Honda-Tech Member
 
Joined: May 2006
Posts: 2,230
Likes: 0
From: USA
Default Re: (one bad dx)

pics of the Rs*R? What car is it for?
Old Feb 26, 2008 | 01:58 PM
  #6  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

i cannot get pictures as of right now becasue im still in school :s but i believe it is for a civic, its the exmag i know that for sure.
Old Feb 26, 2008 | 02:31 PM
  #7  
one bad dx's Avatar
Member
 
Joined: Sep 2005
Posts: 3,779
Likes: 1
From: Neer Canada Dood, ny, 12929
Default Re: (FHTB20allday)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FHTB20allday &raquo;</TD></TR><TR><TD CLASS="quote">lolol i hear you on that one. i try to advocate as much honda-techness as i can on there, that site is also one of the reasons why i will not be owning a honda anymore(i.e to much theft) this is the second time something has happened to honda that i owned and it most likely has something to prob do with that site, unfortunatly.
</TD></TR></TABLE>

Sorry to hear about your misfortunes with the honda game bro. In a perfect world we could all rest assured that when we got up in the am our cars would be outside, with the wheels still, no key marks, no broken windows, no bullshit........but lazy expletives that play the "poor me" card and cant hold a job gotta look baller some how right? So they steal our **** only to look like a clown. But that's our world, reguardless, if I had a SOHC this would be a baller *** setup so bump for you and good luck with your sale

Nick.
Old Feb 26, 2008 | 04:59 PM
  #8  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

thanks man!i wish u did want a sohc cause you would be helping the "pissed off kid who hates theives needs a down payment for a subaru fund". it does feel good however to wake up at 7am and see your window smashed in, your headlights butchered becuase the ******* that tried to steal them couldnt undo the screws and ened up breaking them along with bending my fenders out to **** until it looked like it had j's racing fender flares then getting pissed off and ending in a desprete attempt to steal something by taking the battery along with half of my bumper, yes only have of my bumper( top part was still attached to the rad support), it was a good morning in my part of NY.
Old Feb 26, 2008 | 08:25 PM
  #9  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

bumpp someone wants to enjoy this for the summer
Old Feb 27, 2008 | 07:23 PM
  #10  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

bummpppitttttt
Old Feb 28, 2008 | 07:05 AM
  #11  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

bumpp
Old Feb 28, 2008 | 01:32 PM
  #12  
daluv's Avatar
Honda-Tech Member
 
Joined: May 2006
Posts: 2,230
Likes: 0
From: USA
Default Re: (FHTB20allday)

do you know what generation, or year civic by chance, and if its for a 2/4-door or hatch?
Old Feb 28, 2008 | 02:12 PM
  #13  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default Re: (daluv)

was for a 92-95 civic, its only the axleback so i dont think it would matter much
Old Feb 28, 2008 | 09:21 PM
  #14  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

IM NEGGGGOTIABLE!!!!!!
Old Feb 29, 2008 | 08:15 AM
  #15  
ComeOnKip's Avatar
Honda-Tech Member
 
Joined: Apr 2005
Posts: 2,679
Likes: 2
From: Where the wild things are in, NY, United States of America
Default

yea b20 is horseshit.... i'm glad i live in the sticks of NY and not the city / westchester.... ***** a HOT bed for theives
Old Mar 1, 2008 | 03:21 PM
  #16  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

bumpppp i need to use this money to buy a new carr im vvery NEGOTIABLE!!!!!!!
Old Mar 3, 2008 | 02:20 PM
  #17  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

BUMMPPPPP
Old Mar 3, 2008 | 07:07 PM
  #18  
FHTB20allday's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 71
Likes: 0
From: NY, USA
Default

bump for the night
Old Mar 4, 2008 | 09:59 AM
  #19  
SL0-hatch's Avatar
Honda-Tech Member
 
Joined: Nov 2005
Posts: 1,436
Likes: 2
From: CT, United States
Default Re: FS:UPDATED!!!!!!! Professionally built Turbo D16 Motor/Turbo Setup (FHTB20allday)

pm'd
Old Mar 31, 2008 | 04:01 PM
  #20  
Swipe'd's Avatar
Honda-Tech Member
 
Joined: Nov 2006
Posts: 1,021
Likes: 0
From: New York, NY
Default

bump good luck!
Old Apr 15, 2008 | 07:57 PM
  #21  
blade0314's Avatar
Honda-Tech Member
 
Joined: Mar 2007
Posts: 1,332
Likes: 0
From: NY
Default Re: FS:UPDATED!!!!!!! Professionally built Turbo D16 Motor/Turbo Setup (FHTB20allday)

hey man i got a 1999 honda civic ex with a d16y8 and i was wondering if this kit would fit my car? and if so how much do u want for it? and what else woudl i need that you dont have to get it running? thanks email me back at mcody1@iona.edu
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cityofcaterpillars
Forced Induction
14
May 26, 2016 04:38 AM
FHTB20allday
Northeast (Sales)
2
Mar 6, 2008 06:42 AM
RSant
Forced Induction
10
Dec 19, 2007 03:13 PM
stockhatch91
Honda CRX / EF Civic (1988 - 1991)
13
Dec 4, 2004 09:46 PM
spraa
Hybrid / Engine Swaps
8
Dec 29, 2003 05:57 PM




All times are GMT -8. The time now is 03:07 PM.