Turbo GSR Head ?'s Camshaft options?
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: North Versailles, PA, USA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Turbo GSR Head ?'s Camshaft options?
Okay i am in the process of building a turbo motor and it is time for me to choose head components i already know to get dual springs titanium retainers what i want to know is what is a good cam gear camshaft setup for my motor i also havent bought the turbo yet but i will list the one i was thinking of getting opinons on turbo would be good to
This is my motor
B18c1 Darton M.I.D. sleeved 84mm
J.E forged pistons 9:1 compression
eagle rods
stock crank micropolished & balanced
ACL race bearings
Moroso 5.5 oil pan
Type R oil pump
Turbo
Borg Warner
T04b 57trim (300whp-500whp)
This unit flows 50lbs a minute
56.52mm inducer
75.00mm exducer
Any help on the head and turbo will be greatly appreciated
This is my motor
B18c1 Darton M.I.D. sleeved 84mm
J.E forged pistons 9:1 compression
eagle rods
stock crank micropolished & balanced
ACL race bearings
Moroso 5.5 oil pan
Type R oil pump
Turbo
Borg Warner
T04b 57trim (300whp-500whp)
This unit flows 50lbs a minute
56.52mm inducer
75.00mm exducer
Any help on the head and turbo will be greatly appreciated
#6
Junior Member
Thread Starter
Join Date: Oct 2006
Location: North Versailles, PA, USA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Re: (quicksilver1689)
I was thinking about itr's or ctr's but when i started doin some research the skunk pro 1's kept popping up my budget is in the 3,000 to 4,000 range but that is for everthing to get it on the road
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post