my friend is running a single cam non vtec t3 .57 trim.. he needs a base map so to speak.. anyone have any input

 

VAFC's dont have basemaps. Your friend would need an OBD1 chipped ECU if he wanted a basemap. IMO, that's the best method to go anyway...VAFC's are old news

 

I know that, I am looking for lets call them "settings" some basic settings to start off with on that setup! yeah thats what we will call them "settings"

 

something like this but similar to the setup above not a DSM ha

1G Turbo 16G

This car seemed to run lean to begin with. Even with 550s and all the honeycombs in,
had to richen things up quite a bit to get the fuel trims at 100% (normal). These
settings are with the honeycombs out and the adjusting screw out flush.
Low Setting:
1K +19 2K +12 2.5K +9 3K +6 3.5K +5 4K +5 4.5K +5 6.5 +5
High Setting:
1K 0 2K +3 2.5K +3 3K +4 3.5K +4 4K +4 4.5K +4 6.5K +8
Th-Point
Lo 30% Hi 80%

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by streetspeed607 &raquo;</TD></TR><TR><TD CLASS="quote">I know that, I am looking for lets call them "settings" some basic settings to start off with on that setup! yeah thats what we will call them "settings"</TD></TR></TABLE>

Why the sarcasm? Nobody is going to help you if you're an *** to everyone who answers