timing adjust problem
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 232
Likes: 0
From: Willemstad, Netherlands Antilles
timing adjust problem
I recently changed my obd0 crx to obd1 to use microtech EMS..
the problem I have is that I can't adjust my timing below 16 degrees.... the distributer is all the way retarded and the min that I can get is 16 degrees.
checked the engine timing at the timing belt and everything is ok...
what can the problem be?
the problem I have is that I can't adjust my timing below 16 degrees.... the distributer is all the way retarded and the min that I can get is 16 degrees.
checked the engine timing at the timing belt and everything is ok...
what can the problem be?
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 232
Likes: 0
From: Willemstad, Netherlands Antilles
Re: timing adjust problem (IntegraType-R)
it's supposed to be 16 degrees when the distributer is in the middle.. not fully retarded..
and my car knocks like crazy.. I have 12.8:1 CR
and my car knocks like crazy.. I have 12.8:1 CR
Thread
Thread Starter
Forum
Replies
Last Post