what type of camshaft would be good/ add the most power for a boosted jdm b16 2nd gen:
-use the stock b16 cams
-itr cams
-ctr cams
-gsr cams (i heard these would be the best on a b16- http://www.evans-tuning.com/comp3.html)

or
-skunk2 turbo stage 1 cams?

 

Search in the F/I section and include archived threads.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by search results &raquo;</TD></TR><TR><TD CLASS="quote">
Your search for turbo cams returned 330 results

Your search for boost cams returned 44 results
</TD></TR></TABLE>

Edit - And more info on your build would help as well?

Ali

 

this is the turbo set up i was going to put in most are from rc auto works:
-mini ram
-2.5 downpipe
-tial waste gate 38mm
-greddy rs bov
-intercooler(rcauto works)
-garrett t3/t4 50 trim

-set up is for a dd with about 250 whp or around there
sorry about that i posted this setup in the fi form and no one posted anything

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racereaper7 &raquo;</TD></TR><TR><TD CLASS="quote">
sorry about that i posted this setup in the fi form and no one posted anything
</TD></TR></TABLE>

Honestly, no one probably asnwered because your question has probably been asked several times before.

Just search, you'll find more information. And from there if you still have more questions on specific cams for your setup then you can post and make a thread asking for more clarification.

Ali

 

i'll search some more any if i need more help i'll ask again thanks for your help

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racereaper7 &raquo;</TD></TR><TR><TD CLASS="quote">this is the turbo set up i was going to put in most are from rc auto works:
-mini ram
-2.5 downpipe
-tial waste gate 38mm
-greddy rs bov
-intercooler(rcauto works)
-garrett t3/t4 50 trim

-set up is for a dd with about 250 whp or around there
sorry about that i posted this setup in the fi form and no one posted anything
</TD></TR></TABLE>

like said before this has beem cover 100 times try searching and alot of reading, but for this set up u might want to run with a 3inch down pipe and GSR or ITR cams will be good enough to reach ur goal u can reach that hp with b16 cams, but with the gsr or itr cams it will breath better....