i bought this motor with i guess a broken axle boot.. how do i remove this?

http://www.flickr.com/photos/justjoey06/2098254031/

 

stick a screwdriver or pry bar in between the tranny and the axel and it should pop out

 

wat he said ^^ just get a nice flat head or prybar..it should pop out

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94eh2 &raquo;</TD></TR><TR><TD CLASS="quote">wat he said ^^ just get a nice flat head or prybar..it should pop out</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94eh2 &raquo;</TD></TR><TR><TD CLASS="quote">wat he said ^^ just get a nice flat head or prybar..it should pop out</TD></TR></TABLE>

 

x3

 

x4, same way you would if it had the rest of the axle attached, they prolly did it so the oil wouldn't leak out and to keep the tranny sealed so know dirt/dust would get in there

gl

 

if you're installing the motor yourself and you have to ask this question, please stop and get a professional to do the work for you.

 

ya thats what i thought it just did not come off the first time... thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by instrument &raquo;</TD></TR><TR><TD CLASS="quote">if you're installing the motor yourself and you have to ask this question, please stop and get a professional to do the work for you.</TD></TR></TABLE>


x1,000,000

 

screw driver will work just becareful not to expletive up the seal usally i use the fork prybar

 

prybar/ screwdriver, if all else fails