im rebuilding my jdm b18c. i already have new itr pistons,mugen h/g and new valve seals, acl bearings and arp's just to be on the safe side of things. im going to run either the inlinepro valve springs & retainers or the omni powers.. i dont know yet..

my question is cams..lol who doesnt ask about them.. most ppl build their engines around a good set of sticks. so im wonderous. if you had this set up what would be the best bang for the buck??.. ive heard good things about the following.

1) skunk2 stg 2s ( good upper mid and high range)
2) skunk2 pro 1s. good mid and high depending on build)
3) jun 2s are just a decent all around cam but better in the higher rpms.

with the h/g and itr pistons im thinking c.r. should be around 11.2-11.4ish
which is good for a daily driver.

any input would be highly appreciated.



Modified by conceptEG at 3:06 AM 12/3/2007

 

bump

no one knows the difference between pro1s and stage 2 skunks??????

what would be a better cam in an itr build??

 

there is a whole thread on it on just the 2nd page of this forum. and there is even more if you search for it my friend.

here is a link the the other thread-

https://honda-tech.com/zerothread/2130357