So, i was showin off and i broke my shifter. I look like a jackass, i know. At any rate, I believe i read something about being able to re thread the shifter and make it functional. is there a write up somewhere about this? is there a thread pitch to keep in mind? thanks in advance.

 

buy a new one

 

Might as well buy a new one as they aren't expensive.

If you didn't have a short throw/upgraded bushings in, here is your chance!

 

hmmmmm.... well, im broke. and this is a quick fix.

thanks for the honesty though!

 

i have a shifter head that doesnt need thread, it has 3 allen screws on the sides.
look for one in any auto store.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Convert &raquo;</TD></TR><TR><TD CLASS="quote">So, i was showin off and i broke my shifter. I look like a jackass, i know. At any rate, I believe i read something about being able to re thread the shifter and make it functional. is there a write up somewhere about this? is there a thread pitch to keep in mind? thanks in advance.

</TD></TR></TABLE>


M10x1.5 die and either get your old shifter chunk out of your old **** or get a new ****

 

What part did the shifter broke? if it boke all the way down to the bolt part go under the car and put it in gear with your hand.

 

it basically broke right where the **** starts. stupid Si ****....i have plenty to work with to fix it, i just wanted a few tips before attempting the DIY.
thanks all!