ok is 310 or 330 cc injectors enough for a boosted 6-9 psi d16z6 to run good? or should he get bigger?

 

we had 440s on a turboed rex at 9 lbs

 

aight but still need to know if 310 or 330 is enough!!!

 

310cc injectors can hold 210-230 horsepower so they should work perfect

 

thanks much hes def not gonna be puttin out more than that at 6-9 psi (stock internals) so yea thanks again

 

I wouldn't. I'd personally go w/ 440's or higher. I'm on a fully-tuned z6 at 9psi and the duty cycle on the injectors is over 100% at full boost/high rpm's using 450's. 330's WILL work, but you're gonna really be stressing those things to their limits. 440's/450's aren't that much more $, and it'll cut your risk of leaning out.

 

true, i think it would run fine. but like you said. pick up some 450cc dsm injectors for cheap

 

well hes tight on cash and he found some 310cc's for 47 bucks so thats why i had to ask..

 

yea it would work, but look into the dsm 450cc injectors you can find them under 100$ no problem