measurements for valve lash type s cams
Honda-Tech Member
Joined: Jan 2005
Posts: 1,511
Likes: 0
From: Moreno Valley, CA
Re: measurements for valve lash type s cams (Lubo_25)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lubo_25 »</TD></TR><TR><TD CLASS="quote">.007" int.
.008" exh.</TD></TR></TABLE>
so same as a reg H22 then?
.008" exh.</TD></TR></TABLE>
so same as a reg H22 then?
Honda-Tech Member
Joined: Jan 2005
Posts: 1,511
Likes: 0
From: Moreno Valley, CA
Re: measurements for valve lash type s cams (Lubo_25)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lubo_25 »</TD></TR><TR><TD CLASS="quote">every prelude motor has the same lash specs...
.006"-.007" int.
.007"-.008" exh.</TD></TR></TABLE>
I'm not sure if maybe all VTEC H series have the same valve lash. But i know for sure the H23 has a different lash specs.
.006"-.007" int.
.007"-.008" exh.</TD></TR></TABLE>
I'm not sure if maybe all VTEC H series have the same valve lash. But i know for sure the H23 has a different lash specs.
Trending Topics
Honda-Tech Member
Joined: Jan 2004
Posts: 10,629
Likes: 1
From: Further down the spiral, TX, usa
Re: measurements for valve lash type s cams (Lubo_25)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lubo_25 »</TD></TR><TR><TD CLASS="quote">every prelude motor has the same lash specs...
.006"-.007" int.
.007"-.008" exh.</TD></TR></TABLE>
Maybe every H22, but not the H23 or F22...
.006"-.007" int.
.007"-.008" exh.</TD></TR></TABLE>
Maybe every H22, but not the H23 or F22...
Thread
Thread Starter
Forum
Replies
Last Post
SLVR-DC5
Honda Prelude
11
Mar 7, 2005 11:40 AM
superturboprelude
Honda Prelude
4
Feb 5, 2004 09:08 AM
