Well my bumper is sticking out further then my headlight and there is a gap between the front headlight and front bumper how can I fix this?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fuster_Cluck &raquo;</TD></TR><TR><TD CLASS="quote">I had so many people ask how I got my bumper to fender fitment so tight. I like to help out whenever I can, so here is my 2AM write-up

Note: If your car has been in a wreck you may not be able to get the same results.

One of the cheapest mods you can do to your civic. Yet it does so much for the looks of the car. See for yourself:

You start with a civic that has $hitty OEM hardware:



Next you take your a$$ to Lowes and get the following:
(I picked up some extras in case I lose some of the hardware in the future )
I should of bought the 2 extra nuts but didn't for some reason

ADDED: Guys get stainless steel hardware. The $hit I have now is going to rust eventually. I'll be replacing the hardware one day.



Here's what you are working with:





Here's part of the reason the bumper will not sit flush to the fender :



Here's what I used to make the fender flush:
(place extension on back side and gently hit extension through fender)



The fender ends up like this:



And the bumper goes back on like this:



Some more pics of my hatch ---&gt; HERE

My 600+ (to be over 1,000) picture K20a2 build thread ---&gt; HERE


Modified by Hybrid93Hatch at 4:37 PM 6/14/2007</TD></TR></TABLE>

 

no not that.. thats bumper to fender gap, I dont have any gap between that..

I have a gap between bumper and front HEADLIGHT .. but yeaa

ttt still need help !

 

the bumper looks good,

take your bumper off it could have been in a accident or something wasnt installed right ....check it out

 

Remove the bumper, inspect it for damage, warping, and refit back on.