Hi, i drive a 97 civic with a Ls motor

anyways i read up some stuff about putting a vtec head on a LS, but im still a bit confues.

so heres my question if i were to put a b16/b18 vtec head on my LS what other parts do i need? a head gasket vtec ecu what else?


Thanks!


Eva

 

WELL UR ON THE RIGHT TRACK YOU WILL NEED THE NON VTEC TO VTEC DOWEL PINS HEADGASKET ARP HEADSTUDS FOR GSR (SLIGHTLY LONGER THA B16)VTEC OIL CONVERSION HARNESS WITH WITH A TAP TO TAP THE VTEC HEAD HERES A GOOD LINK IF I DID NOT ANWSER ALL YOUR QUESTIONS
https://honda-tech.com/zerothread?id=1676914

 

i think there are a few companies that make a full conversion kit w/ instructions

 

just did a quick search and found this http://shopping.lightningmotor...n+kit
i dont know if its a good price or not, i would shop around some more
and i noticed the more expensive one comes with the arp headstuds, which last time i looked were around a $100.