wanted to know if gsr rods would fit in an ls block wit ls crank.....

 

No.

 

alright thanks alot

 

yes it will work with gsr pistons too

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STRAKTUS &raquo;</TD></TR><TR><TD CLASS="quote">yes it will work with gsr pistons too</TD></TR></TABLE>

Gsr rods are longer than ls are are narrower on the crank end.They will not work.

 

they will not work dont listen to the noob

 

ok just to let u guys know... i HAVE HEARD of it being used... and I HAVE HEARD that bigfoot have been seen many times...

 

i would also like to know. from someone who has tried this. im planning on using gsr rods on a lsvtec build will it work?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4 Rasta &raquo;</TD></TR><TR><TD CLASS="quote">i would also like to know. from someone who has tried this. im planning on using gsr rods on a lsvtec build will it work?</TD></TR></TABLE>
The answer is still no. But go right ahead
LS crank use LS rods.
GSR crank use GSR rods.

 

thanks smart a@# just wanted to know if they would work.

 

persistant aren't they

 

for real yo, ppl cant ask simple question without gettin bit#h at, gawd damn. ppl are juss trying to learn and better themselves

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4 Rasta &raquo;</TD></TR><TR><TD CLASS="quote">thanks smart a@#
</TD></TR></TABLE>
Perhaps the answer was not clear here:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b19coupe &raquo;</TD></TR><TR><TD CLASS="quote">No.</TD></TR></TABLE>
Or here:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NJIN BUILDR &raquo;</TD></TR><TR><TD CLASS="quote">Gsr rods are longer than ls are are narrower on the crank end.They will not work.</TD></TR></TABLE>
And just to clarify:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b19coupe &raquo;</TD></TR><TR><TD CLASS="quote">
LS crank use LS rods.
GSR crank use GSR rods. </TD></TR></TABLE>
I don't understand why, when the question was answered very clearly, why it had to be asked again. Perhaps you can explain it so a slow guy like me could get it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b19coupe &raquo;</TD></TR><TR><TD CLASS="quote">
The answer is still no. But go right ahead
LS crank use LS rods.
GSR crank use GSR rods. </TD></TR></TABLE>

thats all i wanted to know it makes it much clearer now, but you dont need to be a dick about answering the question. it was a simple questions but w.e

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4 Rasta &raquo;</TD></TR><TR><TD CLASS="quote">

thats all i wanted to know it makes it much clearer now, but you dont need to be a dick about answering the question. it was a simple questions but w.e </TD></TR></TABLE>

its because we see a ton of questions like this and most of the kids asking them dont want to listen. if people are telling u the answer than why bother asking it again? u know what i mean?

no offence to u or nething but its all of the **** questions that are being asked here.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cartune network &raquo;</TD></TR><TR><TD CLASS="quote">

its because we see a ton of questions like this and most of the kids asking them dont want to listen. if people are telling u the answer than why bother asking it again? u know what i mean?

no offence to u or nething but its all of the **** questions that are being asked here.</TD></TR></TABLE>

thanks i understand, atleast now i can say why gsr pistons wouldnt not work in a ls

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4 Rasta &raquo;</TD></TR><TR><TD CLASS="quote">

thanks i understand, atleast now i can say why gsr pistons wouldnt not work in a ls
</TD></TR></TABLE>

gsr pistons dont work on a LS? where u got that?

 

gsr rods will work on a ls block but only if it is used with a gsr crank.

 

why would you want to destroke an LS block?

 

x2

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by all-mtr-teg &raquo;</TD></TR><TR><TD CLASS="quote">why would you want to destroke an LS block? </TD></TR></TABLE>

becuz i heard the bad r/s ratio will blow up my vtak

 

I completely forgot about that

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Combustion Contraption &raquo;</TD></TR><TR><TD CLASS="quote">

becuz i heard the bad r/s ratio will blow up my vtak </TD></TR></TABLE>