How to program a spare pager/remote? Viper 791xv
Thread Starter
Junior Member
Joined: May 2003
Posts: 208
Likes: 1
From: vallejo, ca, us
How to program a spare pager/remote? Viper 791xv
alright i got spare pager remote for my viper 791xv and i dont know how to program the new pager to the car... any body got some insight?
Honda-Tech Member
iTrader: (1)
Joined: Oct 2005
Posts: 9,716
Likes: 3
From: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Re: How to program a spare pager/remote? Viper 791xv (toofast4u752)
open a door
turn the key on....The alarm has to be hooked up to the car ignition for this to work.
Withen 10 sec press and releae the the valet button. Then hold it down. the led will flash and the horn will honk. Press lock on the on the new remote. The alarm should chirp. MAke sure you keep holding the valet button while programming. Then release it when done. I put you in the auto learn standered configuration. This is how dei shipps the units.
turn the key on....The alarm has to be hooked up to the car ignition for this to work.
Withen 10 sec press and releae the the valet button. Then hold it down. the led will flash and the horn will honk. Press lock on the on the new remote. The alarm should chirp. MAke sure you keep holding the valet button while programming. Then release it when done. I put you in the auto learn standered configuration. This is how dei shipps the units.
Thread
Thread Starter
Forum
Replies
Last Post
02type-sk20
Audio / Security / Video
5
Nov 4, 2010 09:25 PM
Dr. Willy
Audio / Security / Video
1
Aug 11, 2008 12:53 AM
mickey513
Audio / Security / Video
8
Jul 9, 2003 03:45 AM
