Well I know a lot of people on here BMX and well so did I until a few years ago. Now my loss is your gain. I would really like to sell the bike as a whole but I am willing to part it out as long as it is worth my time. The bike was built and maintained by a professional at the bike shop I worked at and everything is in great working condition. The only thing left on the bike that is original now is the frame and seat post. I will try and list everything to the best of my knowledge and the prices of when I paid for them. Pics aren’t that good (bad camera) but I can take more or others if anybody wants. Also feel free to ask for any measurements you want and I can get them. I don’t know the weight of the bike (don’t have a scale) but I would put it anywhere from 30-40lbs. I have felt lighter and heavier bikes so it’s right in the middle. I used it for mostly park and it is a good bike with nothing wrong to speak of on the bike other than the small things (some scratches and a ding here or there, one in the down tube from a rail).

The parts list:
2001-02 DK Six Pack frame: 190.00
Knuckle bone grips: 5.00
Odyssey Modulever break handle: 9.00
Eastern bars: 20.00
FSA Pig head set: 25.00
Odyssey front fork: 70.00
Primo Hula Hoop front rim: 70.00
Primo “Stock” front hub w/ 14 mm hollow axle: 30.00
Big Cheese 3 Pc. Crank w/ sealed bottom bracket: 90.00
FSA front sprocket w/ bash guard: 39.00
Primo Meat Tenderizer sealed peddles: 22.50
Heavy duty KMC chain: 10.00
Odyssey rear rim w/ Odyssey Hazard Hub (14mm hollow axle): 150.00
Snafu front and rear tires: 20.00 ea.
Odyssey slick break cable: 4.50
Odyssey Evolver rear brakes: 18.50
Primo Casket stem: 25.00
DK Pipe Bomb pegs x3: no idea on cost but they weren’t cheap and don’t wear very fast at all (very hard)

Gearing: 36 front, and 14 rear


Prices from Quality Bike catalog totaling over $800.00. Make me an offer on the bike or certain parts. No Low Balling!

 

bump

 

M8 nice bike i dont know much about them but, doubt you will sell this on a car site.. UNLESS YOU PAINT HONDA ON IT!

 

ya I should put an H badge on the front and maybe lower it a bit, perhaps a CTR or ITR tag on the back of the seat. It has been sitting for two years bc I am in school and with that, work, homework and looking at job options when I graduate (1 year left ) I don;t have time. just thought I would throw it on here and hope for the best. Thanks for the look.

 

bump

 

bump because i used to work at glenview schwinn.

 

should have put your camera into macro mode to get better close up pics, nice *** bike though

 

ya nobody is looking at this. bump if you do or add any comment.

 

afternoon bump

 

up up and away