Ok so This Is probally Posted Some HWere But I Cant Find Anything About It Sooo. A buddy Of Mine Gave Me A t25 Turbo And Intercooler + piping For My B16a But I Cant Find A Turbo Manifold That Bolts To The Turbo. All I Can Find Is The Common T3/T4 And Im Using T25 For ***** And Grins Till Get Money For T3 Kit. But If Any Tips On Where To Find Plz Help Thx.

 

Mitsu housing(circle) or T2 Garret housing(rectangle likeT3)?

 

apexi?

 

Yeah, a guy I'm making a manifold for had the same problem. He wanted to use a GT28 with a T25 flange, but noone makes the manifolds with them that he could find.

 

Greddy b/d-series?

 

yeah the turbo is from a 94 mitsu eclipse gst front wheel drive. thanks all for help. if any other suggestions plz type me thax again.

 

We've made custom flanges so that we could make our mini log manifold w/ the round mitsu inlet flange. Basically it tapers a T3 inlet style to the Mitsu inlet. If your interested let me know.

 

so it a manifold for the b16a t3 style with an inlet for the mitsu turbo correct? and how much does that run in a price? and i am deff interested thx.

 

PM'd

 

The Greddy 18G exhaust manifold and HKS T25 manifold for b-series is available to the public.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheShodan &raquo;</TD></TR><TR><TD CLASS="quote">The Greddy 18G exhaust manifold and HKS T25 manifold for b-series is available to the public.</TD></TR></TABLE>

hes got a DSM flanged turbo.

 

the turbo is off a dsm it came with the whole setup off a 94 2.0 eclipse all the guy did was unbolt the manifold from the block with everything attached and gave it to me.... so is even possibly to use fro my car? srry being so difficult.

 

of course the manifold isnt going to fit. its a completely different motor.

look for a used log manifold with a DSM flange which is uncommon for b series or find an ebay manifold if you dont have a lot of money and dont mind rewelding it a couple times.