how much hp are they rated to? t

urbo is t3/t4 .57 a/r .63
intercooler is a gen 3 drag

 

500whp or so maybe more.. i ran them to around 430whp based on my trap speed. Held up well. But my engine lasted for 1k miles until the valve failed...

 

were you running stock head? also how much hp is that turbo rated to. the one that i listed and also how much for the intercooler

 

the scat rod is basically the same as the eagle and the eagle is a knock off Carrillo design and the Carrillo design is just badass

 

I have always run scat rods and love them, I have even made some good whp numbers with them and turned 11K rpm with them and they have always done right by me.

 

scat has been making bottom end parts for sometime, i know theyve been making v8 cranks and rods for a long time with good results.

 

with a good tune, they should hold up perfectly, to pretty much any HP level you'd run

 

im gonna b running a sleeved 2.0 gsr block. w/ scat rods and wiseco pistons. drag gen 3 turbo kit...i want to make close to 400 hp for now...if im not satisfied then upgrading turbo for 500

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quicksilver1689 &raquo;</TD></TR><TR><TD CLASS="quote">scat has been making bottom end parts for sometime, i know theyve been making v8 cranks and rods for a long time with good results.</TD></TR></TABLE>

yup i run a scat crank in my V8 5.9L gas dodge ram

 

We have carried Scats for a while now, and have never had a customer complaint about them. We have a few customers using them at near 400Hp levels. I'll bet they can easilly handle in excess of 500Hp. If you want, hit us up with an email at Sales@TunerToys.com and we can ask Scat for you. I can't imagine they would give us any better info as a dealer, than they would give you as a customer, but if you want us to try, we will be happy to.

Craig

You can check them out on our website to see a bit more information about them (balancing, bolts, materials, etc).

http://tunertoys.zoovy.com/cat...rods/

 

We started using Scat rods about a year ago and have a few customers that are running in the 400whp range to and no problems.

We just wanted an alternate to the Eagle rods. These fit the bill just fine.