I ordered a h22 from hmotorsonline that has obviously been sittin up for a while and was wondering if there is anyway to prime this motor before the initial startup? If no way to prime then what other procedures should I persue?

 

i know there's a slip of paper from hmotors that states what should be done..
clean the motor, change the plugs/wires and the cap and rotor, and i would changing the t-belt and waterpump.

 

do what integratype-R said you should be fine. i usually open up the valve cover and atleast put assembly lube on the cams.

 

And if you have a few spare minutes, and a 10mm allen, lean the engine to the EX. side ,remove the allen from the oil pump and pour in some oil.

 

thanks for the info. What about taking the spark plugs out and pourin a little oil on top of the pistons

 

What can it hurt? Nothing.