just recently got a 10mm carbing oil catch can in a trade deal

and was wondering the best/proper/most effective way to install it

i did a search but only found forsale adds, no real install threads, pics whould be awesome


thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 01-0720 &raquo;</TD></TR><TR><TD CLASS="quote">just recently got a 10mm carbing oil catch can in a trade deal

and was wondering the best/proper/most effective way to install it

i did a search but only found forsale adds, no real install threads, pics whould be awesome


thanks </TD></TR></TABLE>

as far as i see catch cans aren't effective cause they don't catch half the **** so why install them to begin with.. unless you decide to ventilate from back of the block and have healthy engine, you're not going to accumulate all that much. if you ventilate out the valve cover, you don't need to catch anything, its already baffled and if you're engine's healthy you won't make a mess.

 

Which location? Valvecover breather, PCV, intake system?

It's just a link in between a vaccum pull. Put it where you want.

 

i dont know where or how to install this, thats why im asking


where is the best/most effectly place and way to install this

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 01-0720 &raquo;</TD></TR><TR><TD CLASS="quote">i dont know where or how to install this, thats why im asking


where is the best/most effectly place and way to install this</TD></TR></TABLE>
I have mine at the IM and the back of the block. During daily driving conditions I have never noticed that it caught anything but when at the road courses it certainly starts to fill up.