Pulling motor, axle problem!!!!!!!!!
New User
Joined: Apr 2001
Posts: 4,143
Likes: 0
From: Wilmington, NC, US
Re: Pulling motor, axle problem!!!!!!!!! (dontcare61776)
remove the crown nuts on the spindles. remove the large nut on the end of the axle that secures it to the spindle. remove axle from spindle by take spindle free of LCA. Use a pry bar and some good old fashioned tugging to get the axles out of the trtanny/balancer shaft.
Good Luck
Erik
Good Luck
Erik
Thread
Thread Starter
Forum
Replies
Last Post