1. what is a good piston company that makes 86mm or 87mm pistons

2. what are the strongest rods out there

3 how much power can a stock b18b crank handle

i am looking for lots of rev and tons of boost

 

copy and paste those questions into the search box and u will find the answer

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fcfromhell420 &raquo;</TD></TR><TR><TD CLASS="quote">1. what is a good piston company that makes 86mm or 87mm pistons

2. what are the strongest rods out there

3 how much power can a stock b18b crank handle

i am looking for lots of rev and tons of boost</TD></TR></TABLE>

good luck with that. i would suggest you do a little more research on what you are about to do.

 

good luck w/ 86 or 87 mm on a B series......and boost

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 &raquo;</TD></TR><TR><TD CLASS="quote">good luck w/ 86 or 87 mm on a B series......and boost </TD></TR></TABLE>

true story...

I believe 84.5 is pushing it..

CP makes good pistons, but probably not that big.
Pauter makes really strong but expensive rods.

i dunno about the crank, but its probably good up until the point where you would need sleeves, which isnt gonna happen with a 86 mm bore.

 

just tell him what he wants to hear.... otherwise, you'd end up arguing with a tard.

 

thanks guys
i wont be going that big i just seen a set of sleeves that were 86mm and i have never seen any body with that big of a bore and was courius how they work

 

Don't make the bunny mad!