FS: Peakboost, Si harness, stealthmode, JRC. d16*
FS: Peakboost, Si harness, stealthmode, JRC. d16*
Getting out of the turbo game. Not like I really started anyways .
LOCATION: Twin Cities, MN
- BARE D16y8 Head $20 or B/O.
- D16z6 bare block $80 or B/O.
- Hot tanked
- Honed
- Needs to be bored and honed again, machinest scratched one of the cylinder walls.
-Slightly used z6 Water pump with around 25-30k $25 or B/O.
- D16z6 flywheel $20 or B/O.
- D16z6 Crankshaft Good condition. I was going to reuse it. $50 or B/O?
- 99-00 Civic DX wheel covers $40 -
I'll trade for:
B-series VTEC head.
99-00 Climate control bezel.
ampeg bass cabinet or amp. <--- worth a try.
Modified by chippy at 1:45 PM 7/13/2007
Modified by chippy at 1:45 PM 7/13/2007
Modified by chippy at 1:47 AM 7/17/2007
Modified by chippy at 1:48 AM 7/17/2007
Modified by chippy at 2:54 PM 8/8/2007
LOCATION: Twin Cities, MN
- BARE D16y8 Head $20 or B/O.
- D16z6 bare block $80 or B/O.
- Hot tanked
- Honed
- Needs to be bored and honed again, machinest scratched one of the cylinder walls.
-Slightly used z6 Water pump with around 25-30k $25 or B/O.
- D16z6 flywheel $20 or B/O.
- D16z6 Crankshaft Good condition. I was going to reuse it. $50 or B/O?
- 99-00 Civic DX wheel covers $40 -
I'll trade for:
B-series VTEC head.
99-00 Climate control bezel.
ampeg bass cabinet or amp. <--- worth a try.
Modified by chippy at 1:45 PM 7/13/2007
Modified by chippy at 1:45 PM 7/13/2007
Modified by chippy at 1:47 AM 7/17/2007
Modified by chippy at 1:48 AM 7/17/2007
Modified by chippy at 2:54 PM 8/8/2007
Trending Topics
Honda-Tech Member
Joined: Jan 2003
Posts: 1,457
Likes: 0
From: san diego, ca, usa
Re: FS: Peakboost, Si harness, stealthmode, JRC. d16* (chippy)
Since you didnt answer your PMs Ill ask here. What kind of conidition is the mani/DP in? How much are you asking and do you have pics?
Re: FS: Peakboost, Si harness, stealthmode, JRC. d16* (eh3 93)
whoops sorry bro i must have missed it here at work. Everything is used. I bought it from a guy in FL. The downpipe has 2 o2 hole bungs and 2 pipes they welded on for a PVC set up. The Dumptube was TIG welded by previous owner so it could be extended towards the back. As for the Manifold still looks good and sturdy. I cleaned it up a bit with a scotch brite, because i was going to get it ceramic coated. 
that's the best i can do untill i finish up a wedding this weekend.
that's the best i can do untill i finish up a wedding this weekend.
Re: FS: Peakboost, Si harness, stealthmode, JRC. d16* (b18_ef_hatch)
awesome, i work 7-3:30 so anything after that should be good. oh and i get no service in my work area so leave me a message! 
Thread
Thread Starter
Forum
Replies
Last Post
EJ1 wilcox
Honda Civic / Del Sol (1992 - 2000)
14
Feb 10, 2006 09:13 AM
