quick head gasket question
Honda-Tech Member
Joined: Dec 2001
Posts: 18,151
Likes: 2
From: Hollywood Babylon
Re: quick head gasket question (juanb)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by juanb »</TD></TR><TR><TD CLASS="quote">Just wondering if a stock gsr head gasket will be fine for a 81.5 mm block, or would i have to get a 81.5 mm gasket.</TD></TR></TABLE>
Im pretty sure a stock gasket is 81.5mm anyway to allow for OEM oversized piston install.
Im pretty sure a stock gasket is 81.5mm anyway to allow for OEM oversized piston install.
Honda-Tech Member
Joined: Aug 2002
Posts: 11,001
Likes: 2
From: Boca Raton, FL
Re: quick head gasket question (juanb)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by juanb »</TD></TR><TR><TD CLASS="quote">Just wondering if a stock gsr head gasket will be fine for a 81.5 mm block, or would i have to get a 81.5 mm gasket.</TD></TR></TABLE>
It will work, stock gaskets are over bored
It will work, stock gaskets are over bored
Thread
Thread Starter
Forum
Replies
Last Post
Chillinit
Forced Induction
5
Jun 21, 2004 11:22 AM
SRT-WHORE
Hybrid / Engine Swaps
6
Sep 2, 2002 10:15 PM