Ok guys need some help choosing the right gasket.
Which head gasket should i buy, don't want the head gasket to be the weak link here. Aiming for around 600 to 650 whp

ERL built GSR block:

- 84mm cp pistons(coated)
- Pauter X-beam rods
- micro-polished crank
- ERL 5 main girdle

The head i will be using is a full ported en polished GSR head with full crower valvetrain and 1 mm oversized valves.

 

GE bored oem gasket.
http://www.accountwizard.com/c...d=236

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dpetro1 &raquo;</TD></TR><TR><TD CLASS="quote">GE bored oem gasket.
http://www.accountwizard.com/c...d=236 </TD></TR></TABLE>
Thanks man.
More suggestions?

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dpetro1 &raquo;</TD></TR><TR><TD CLASS="quote">GE bored oem gasket.
http://www.accountwizard.com/c...d=236 </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dpetro1 &raquo;</TD></TR><TR><TD CLASS="quote">GE bored oem gasket.
http://www.accountwizard.com/c...d=236 </TD></TR></TABLE>



im using one, made over 600whp, and would have no worries pushing it way farther. i drive it every day too.

 

i still use cometic. 83mm gsr here, last year was an 84mm b16.

 

 

why don't you call erl ask them what they recommend

 

ive used golden eagle gaskets for the past 3 years

 

cometic is what i use on my 84mm ERL block. Im actually using a 84.5mm gasket on my 84mm block.

 

I would first find out how thick you need the gasket to be, because that may limit some of your options.

 

As far as I know ERL suggests Cometics to use.
ERL sleeves theire blocks as stepdeck and found Cometic to work best.