how do I get this &@#$ing bushing back into the endlink?
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 241
Likes: 0
From: SF, CA, USA
how do I get this &@#$ing bushing back into the endlink?
So I've got an ITR endlink with a popped bushing and I have tried forcing that little bugger back in for some time. Does anyone have any good recommendations for DIY on getting the bushing back in on an endlink? I'd rather not take it to a shop, but if I have to I will.
Thanks!
Thanks!
Thread Starter
Junior Member
Joined: Dec 2006
Posts: 241
Likes: 0
From: SF, CA, USA
Re: (pdiggitydogg)
Freeze the bushing and heat up the metal endlink.....I'll have to try that.
Any other tips people have had success with. I don't have a vice or press at home, but I have a c-clamp. Do I stand a chance?
Any other tips people have had success with. I don't have a vice or press at home, but I have a c-clamp. Do I stand a chance?
Thread
Thread Starter
Forum
Replies
Last Post
PatrickGSR94
Suspension & Brakes
25
Jul 14, 2009 04:29 PM
aserenehope
Honda Civic / Del Sol (1992 - 2000)
5
Dec 7, 2006 02:27 PM
