alright so this is really bothering me.
i did a OBD0 to OBD1 conversion yesterday. i used a Boomslang harness and a P28 chipped ECU (ecu is for an auto). i'm throwin codes 14 (IACV) 19 (transmission lockup) and 20 (electrical load detector). i went in with crome and disable ELD and that code went away. i've always had a code 14 even though ti works just fine and i know i'm ont gonna be able to get rid of 19 since i have a auto ecu.

well the biggest problem is now the car sounds like a WRX. #1 is dead. i'm not gettin any fuel to #1. ran the car for a while pulled a plug and it was totally dry. swapped out injectors for a known good injector from a friends car and still nothing. checked continuity of the injector harness (clip to ECU) and it has continuity.

i've searched and searched and searched and i cant find anything.

i have a strong feeling i'm overlooking something simple.

i didnt wire up Knock or Vtec pressure


i could really use some help


car is a 91 hatch w/b16


Modified by neofreak at 7:16 PM 5/20/2007

 

bump