In the morning the car was working fine. This afternoon i was driving and i noticed when i started to brake i got little brake power and the pedal went all the way to the floor but when i turn the car off the pedal doesn't push down at all. Does anyone know what the problem might be?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Donhonda84 &raquo;</TD></TR><TR><TD CLASS="quote">In the morning the car was working fine. This afternoon i was driving and i noticed when i started to brake i got little brake power and the pedal went all the way to the floor but when i turn the car off the pedal doesn't push down at all. Does anyone know what the problem might be?</TD></TR></TABLE>

bleed your brake system. What car is this??does it have rear discs? its one of the three...a leak somewhere, brake booster, or brake master cylinder.

 

^^ Leak somewhere.
Bleed it and look for leaks, see if there's a hole in a brake line somewhere.

Use some good fluid to replace it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bmoua &raquo;</TD></TR><TR><TD CLASS="quote">bleed your brake system. What car is this??does it have rear discs? its one of the three...a leak somewhere, brake booster, or brake master cylinder. </TD></TR></TABLE>
I have a stock 95 ex. How do i bleed the brake system?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Donhonda84 &raquo;</TD></TR><TR><TD CLASS="quote">
I have a stock 95 ex. How do i bleed the brake system?</TD></TR></TABLE>

Like you bleed the brakes on any other honda.

https://honda-tech.com/zerothread?id=1571640

 

Funny thing just happened i was going to take the car to my friends house. And the brakes were working fine. I'm still going to bleed it and check for leaks but, does anyone know why that could be? ( I know this is dumb question)