i ordered these slotted and cross drilled rotors. well, their for 92-95 civics with abs. mine doesn't, so it didn't fit, rotor was a lil too large. so is there any other models these rotors(front) should fit?

 

abs rotors aren't any differen't than non-abs rotors. It's the piston's that are differen't.


Question, why cross-drilled and slotted? I hope they're brembo or at least forged that way.

 

You bought 10.3" rotors, which will fit 92-00 Civic EX, 92-95 Civic Si ABS, 94-97 Del Sol VTEC, 99-00 Civic Si, and 90-01 Integra.

 

If you did get the ex/si rotors, than they are oversized. I believe the stock size for a non-abs is like 9.5

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rick9293sl2 &raquo;</TD></TR><TR><TD CLASS="quote"> I believe the stock size for a non-abs is like 9.5</TD></TR></TABLE>

Correct, but to be more elaborate, 92-95 Civic CX, VX, DX, Si (non-ABS), and LX are 9.5". EXs are still 10.3" even without ABS.

 

so wait a sec, these rotors should fit my 93 ex coupe then huh?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by y2kferari &raquo;</TD></TR><TR><TD CLASS="quote">so wait a sec, these rotors should fit my 93 ex coupe then huh?</TD></TR></TABLE>

Yes

 

well ****, i geuss i'll see if i'm missing anything when i try 2 put them on again. man, blueintregraboy, you always seem 2 answer my questions, thanx yo