this is all i used to put them in

2) 9/16 wrenches
1) screw driver (phillips)
1) screw driver (flat head)
1) mini saw

and this is what came out

 

how well does the light show on the road from those fogs? I've got some similar to those but i don't want to use them unless they help for bad weather or early/late night driving (it gets foggy around here in the early morning on the way to work)

 

i put them on a few hours ago i will let you know how they look when it gets dark

 

where did you get the fogs?

 

My buddy had those fogs lit the road up good at night.

 

are those apc? they look like the ones i picked up at auto-zone the other week, i fixed my current fogs, instead of installing them though... so now there sitting in my basement... probably till i get another car...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by P.Heez &raquo;</TD></TR><TR><TD CLASS="quote">how well does the light show on the road from those fogs? I've got some similar to those but i don't want to use them unless they help for bad weather or early/late night driving (it gets foggy around here in the early morning on the way to work)</TD></TR></TABLE>

who cares if they light up the road or not..there uber jdm

 

i got these at advance autoparts to give it a jdm look or what not but i had them installed in the middle pocket of the bumper so today i desided to put them like the jdm bumper since i cant afford the jdm front end i guess this satisfies me any body out there filling the look on the usdm bumper feel free to do it to yours

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tigueremalo &raquo;</TD></TR><TR><TD CLASS="quote">i got these at advance autoparts to give it a jdm look or what not but i had them installed in the middle pocket of the bumper so today i desided to put them like the jdm bumper since i cant afford the jdm front end i guess this satisfies me any body out there filling the look on the usdm bumper feel free to do it to yours</TD></TR></TABLE>

um your not the 1st one to do this i hope you know...

looks good though, deffinately not JDM but they look good anyway.

 

personnally i dont care if there JDM or not, but they look a heela lot better on the outside rather then mounted in the middle probably better light too even if there shitty autozone ones.

i bet you could upgrade the bulb for brighter light

maybe lose the yellow....... depends on how it looks on the car i guess

 

Modified by tigueremalo at 11:41 PM 4/29/2007

 

Here are the pictures I promised. The last post didnt work.....






BUMP IF YOU LIKE

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tigueremalo &raquo;</TD></TR><TR><TD CLASS="quote">Here are the pictures I promised. The last post didnt work.....






BUMP IF YOU LIKE</TD></TR></TABLE> bump it...hahaha very nice and good job.


I would be dead if i did the fabricating in the kitchen...all the bits of plastic good job and looks nice

 

to me they look like they dont light up the road very good.

 

they actually do light up the road very nicely, i used to have a set on my bumper b4 i put in some EG fogs, and now im gonna be goin with the jdm ones since i just picked up a set from ebay, i have a set of clear ones that i will hopefully be puttin in my hatch too. so we will see.

 

lol. Atleast they could be a little more retangular.


btw...wow at your corners.

 

yea i kno that is one of the reasons i swapped em for the EG's. the APC/Wal-Mart/Advanced/Autozone/Kragen's ones leave a bit too much of a gap at the ends for me.

are u talkin bout his corners or mine?

 

they look cool except they dont fit the shape of the cut outs see some gap
that why i like the civic si bumper it has the patern on the inside to cut out and fit the factory fogs or you could cut it to fit any really.
flush looks more clean imo.
still nice i give ya props

i was thinking about taking the yellow ones off my 88 lude and put em on my si hb
another thing i heard that i dont know if its tru is these wrap around bumper indicaters fit SiR front end is this tru


edit oops i put the wrong pic at first of my civics engine bay oops teehee.
grolsch gos good w/morphene flavour cigar i guess

Modified by 91ED7Si at 9:10 AM 4/30/2007


Modified by 91ED7Si at 9:13 AM 4/30/2007

 

what brand are those foglights?

 

they came stock on the prelude si if yer talkin to me
they mayve been an option tho

 

nah the one tigueremalo got