Hey everybody, I have a b18a1 that ran good. I took it to a machine shop and had it super cleaned and to make sure that the block and head was not cracked or warped. I then purchased a turbo that came off from a ford probe, the turbo was pulled apart and everything was replaced, basicly the turbo was rebuilt. All I have is the block, head, and turbo. The head is currently off from the block, but I still have the head studs. The engine still turns over easily, and everything is clean. I will post pictures tomorrow. Im looking to get around $500, obo.

If you purchase this engine for $500, I will put a multi layer head gasket in, and bolt down the head.


Modified by ZStephens at 5:27 PM 4/14/2007